High frequency motor/gear noise sucks to dampen. Wow.
So I've decided I'm going to go big on this, physically. Nobody really cares if their sex robot is a little bit bigger right? It'll still fit on an Ender 3 print bed (220x220) so the vas...
This is basically moving each OSR2 servo 10mm inwards, sticking a 25t servo hub on the arm, and extending the arm inside the robot a little. Add baffling around the servo and I'm hoping this shows some decent results in sound dampening. May need t...
2021-07-19 07:56:33 +0000 UTC View PostJust wanted to say thanks, having a few folk chip in over here has been a nice bit of encouragement, so I wanted to share the things I'm working on over the next couple months.... unless a cooler idea appears.
SR2
Currently wor...
I'm making an OSR2+ again, here's some lightly tweaked and upgraded servo arms.
They are slightly stronger and have more quality of life features, but are otherwise identical to the stock parts. No need to upgrade if yours work well for you....
2021-07-06 18:47:39 +0000 UTC View Post
Required: 350mm+ (14 inches+) of 4mm outer diameter PTFE tubing.
Commonly used with 3d printers, called bowden tube. You probably shouldn't cut your printer's bowden tube for this.
See the SR6 version build video if you would like mor...
Required: 350mm+ (14 inches+) of 4mm outer diameter PTFE tubing.
Commonly used with 3d printers, called bowden tube. You probably shouldn't cut your printer's bowden tube for this.
2021-06-15 04:49:21 +0000 UTC
View Post